AcoustiSeal™ (Professional Series) Acoustical Sealant
AcoustiSeal™ Pro Series Acoustical Sealant is used for wall/floor junctions to seal cracks and voids per laboratory test data, heating and A/C ducts, cold air returns, exposed joints, electrical and utility outlet boxes.
Features and Benefits:
-
Exceeds LEED™ Building Requirements
-
Low V.O.C.
-
Low Odor
-
Non-Toxic
-
Cost Effective
-
Essential for High STC Walls/Floors
-
Convenient Large Size Tubes
-
Acoustically Effective
-
Remains Soft and Flexible When Dry
-
Bonds to Wood, Concrete, Glass, Gypsum, Metal and Plastic
-
Paintable
-
Dispenses Easily
-
Easy Cleanup with Soap and Water
-
Stops Noise from Leaking Through Joints and Edges
-
Will Not Crack
-
When Used Properly, AcoustiSeal™ Drastically Increases the Overall STC of Floor, Ceiling and Wall Assemblies
Material:
Acoustical Sealant
Size:
28 oz Tube
Coverage:
1/4" Bead: 85 Linear Feet per Tube
3/8" Bead: 40 Linear Feet per Tube
Features:
Essential for achieving high STC value for sound isolation
Applications:
Wall/floor junctions to seal cracks and voids per laboratory test data, heating and A/C ducts, cold air returns, exposed joints, electrical and utility outlet boxes.
Color:
Grey
Flammabilty:
ASTM E-84 - 76, Class A
Instructions:
When using AcoustiSeal™ the goal is to create a completely sealed room. Think of the room you are sealing as a water thank:
-
Make sure the surfaces that are to be sealed are clean.
-
Cut the nozzle to create an appropriately sized hole.
-
The image below shows three possible AcoustiSeal™ applications. Image "A" shows sealant under one layer of drywall on both sides. Image "B" is the same as "A" with the addition of a bead under the plate resulting in a better seal. Image "C" shows a multiple drywall layer install with beads under each layer and a heavy bead under the plate. This would yield an excellent seal.
-
Clean up with soap and water while still wet.
-
Allow to dry typically 48 hours before painting.
-
Drywall mud can be applied directly over AcoustiSeal™.
First Aid:
Keep out of reach of children. Wear eye protection. Skin Contact: Wash affected area thouroughly with soap and water. Eye Contact: Flush thouroughly with water and obtain medical attention. Inhalation: Remove to fresh air. Seek medical attention if swallowed. Refer to MSDS for further information.
